Monday, June 21, 2021

CRPF Assistant Commandant (Civil/Engineer) in CRPF Examination, 2021

CRPF Assistant Commandant (Civil/Engineer) in CRPF Examination, 2021. The Central Reserve Police Force will conduct an open examination for recruitment to the post of Assistant Commandant (Civil/Engineer) as per the Recruitment Scheme formulated by the Ministry of Home Affairs. The recruitment process will consist of Physical Standard Test (PST) & Physical Efficiency Test (PET), Written Examination, Documentation followed by Detailed Medical Examination (DME) and Interview. The vacancies are as under:

Important Date:

Opening date of application: 30/06/2021

Closing date of application: 29/07/2021

Date of written examination: To be notified later

 

Post

UR

EWS

OBC

SC

ST

Total

Scale of Pay

Minimum

Educational qualification

Age

AC

 

(Civil/ Engineer)

13

02

06

03

01

25

Level 10

 

(Rs. 56100-

177500

Bachelor’s Degree in Civil Engineering from a

recognized University

Not exceeding 35 years (Relaxable for Govt.

Servant upto five years in accordance with instructions issued by the Central Govt.

 

  AGE LIMIT AND RELAXATION:

 

Not exceeding 35 years (Relaxable for Govt. Servant upto five years in accordance with instructions issued by the Central Government). The crucial date for determining the age limit shall be the closing date for receipt of application from candidates {The crucial date for determining the age-limit shall be the closing date for receipt of applications from candidates in India (except the closing date prescribed for those in Assam, Meghalaya, Arunachal Pradesh, Mizoram, Manipur, Nagaland, Tripura, Sikkim, Ladakh Division of J & K, Lahaul and Spiti District and Pangi Sub-Division of Chamba District of Himachal Pradesh, Andaman Nicobar Islands or the Union Territory of Lakshadweep)

 

Fees details :

Male candidates belonging to Unreserved/EWS/OBC category applying for recruitment should deposit Rs. 400/- (Rupees Four hundred) only as examination fee. Candidates belonging to Scheduled Castes/Scheduled Tribes and female candidates are not required to pay any fee.

 

Fee may be sent through Indian Postal Orders and Bank Drafts only which is issued on or after 30/06/2021.

 

HOW TO APPLY:

Candidate should read the instructions in this Notice carefully before making any entry or selecting options. Candidate should supply all the required details while filling up the form and will have to paste their photograph and signature. Due care should be taken by the candidates to fill up their application form correctly. Incomplete or defective applications shall be summarily rejected. No representation correspondence regarding such rejection shall be entertained under any circumstances.

 

The specimen application form is attached with this notice. The application must be submitted by hand/post only on or before closing date of applications till 1800 hrs.

Opening date for application                : 30/06/2021 Closing date of application                      :29/07/2021

The recruitment process shall be as under:

 

Sl No.

Stage

Recruitment Process

01.

Stage-I

Physical Standard Test/Physical Efficiency Test

02.

Stage-II

Written Examination

03.

Stage-III

Documentation/DME

04.

Stage-IV

Review Medical Examination

05.

Stage-V

Interview

 

 

STAGE- II : PST/PET qualified Candidates will be issued admit card for written exam.

The written examination will be as under:

 

The written examination will consist of Two papers carrying 500 marks :

Paper -I (Multiple choice question/OMR based) Duration-2 Hours Total - 200 Marks (2 mark for each Question). Distribution of marks as follows:-

 

Sl. No.

Subject

No. of questions

Marks

Time

1.

General Awareness (Bilingual)

15

30

120 Minutes

2.

Reasoning (Bilingual)

10

20

3.

Numerical Aptitude (Bilingual)

10

20

4.

General English

15

30

5.

Engineering Aptitude

50

100

 

Note:- There will be penalty (Negative Marking 1/3rd ) for wrong answers marked by a candidate in the objective type question papers:-

 

Paper–II (Civil Engineering) Duration -3 Hours Total - 300 Marks (Conventional /Subjective Type Paper).

 

Standard and Syllabus

 

The standard of paper in General Studies and Engineering Aptitude (Paper-I ) will be such as may be expected of an Engineering/Science Graduate. The standard of papers in other subjects will approximately be that of an Engineering Degree Examination of an Indian University. There will be no practical examination in any of the subjects.

 

General Studies and Engineering Aptitude, Paper-I, Objective Type:

 

  1. Current issues of national and international importance relating to social, economic and industrial development Engineering Aptitude covering Logical reasoning and Analytical ability 3. Engineering Mathematics and Numerical Analysis 4. General Principles of Design, Drawing, Importance of Safety 5. Standards and Quality practices in production, construction, maintenance and services 6. Basics of Energy and Environment: Conservation, environmental pollution and degradation, Climate Change, Environmental impact assessment 7. Basics of project management
  2. Basics of Material Science and Engineering 9. Information and Communication Technologies (ICT) based tools and their applications in Engineering such as networking, e-governance and technology based education. 10. Ethics and values in engineering profession.

 

Note:- The paper in General Studies and Engineering Aptitude will include Knowledge of relevant topics as may be expected from an engineering graduate, without special study . Questions from all the 10 topics mentioned above shall be set. Marks for each Topic may range from 5 % to 15% of the total Marks in the paper.

 

Civil Engineering, Paper-II (Conventional/Subjective Type Paper)

 

Contents for syllabi for both the Papers together for Paper-I (Objective type) and Paper-II (Conventional/Subjective Type ) separately for each other.

 

  • Building Materials - (Timber, Brick, Cement, Cement Mortar, Concrete)- Stone, Lime, Glass, Plastics, Steel, FRP, Ceramics, Aluminum, Fly Ash, Basic Admixtures, Timber, Bricks and Aggregates: Classification, properties and selection criteria; Cement: Types, Composition, Properties, Uses, Specifications and various Tests; Lime & Cement Mortars and Concrete: Properties and various Tests;

Design of Concrete Mixes: Proportioning of aggregates and methods of mix design

  • Solid Mechanics -Elastic constants, Stress, Plane stress, Strains, plane strain, Mohr's circle of stress and strain, Elastic theories of failure, Principal Stresses, Bending, Shear and Torsion.
  • Structural Analysis - Basics of strength of materials, Types of stresses and strains, Bending moments and shear force, concepts of bending and shear stresses; Analysis of determinate and indeterminate structures; Trusses, beans, plane frames; Rolling loads, Influence Lines, Unit load method & other methods; Free and Forced vibrations of single degree and multi degree freedom system; Suspended Cables; Concepts and use of Computer Aided
  • Design of steel Structures - Principles of Working Stress methods, Design of tension and compression members, Design of beams and beam column connections, built-up sections, Girders, Industrial roofs, Principles of Ultimate load

 

  • Design of Concrete and Masonry structures -Limit state design for bending, shear, axial compression and combined forces; Design of beams, Slabs, Lintels, Foundations, Retaining walls, Tanks, Staircases: Principles of pre-stressed concrete design including materials and methods; Earthquake resistant design of structures; Design of Masonry
  • Construction practice, planning and management - Planning, Equipment, Site investigation and Management including Estimation with latest project management tools and network analysis for different Type of works; Analysis of Rates of various types of works; Tendering Process and Contract Management, Quality Control, Productivity, Operation Cost; Land acquisition; Labour safety and
  • Fluid Mechanics, Open channel Flow, pipe Flow -Fluid properties; Dimensional Analysis and Modeling; Fluid dynamics including flow kinematics and measurements; Flow net; Viscosity, Boundary layer and control, Drag, Lift, Principles in open channel flow, Flow controls, Hydraulic jump; Surges; Pipe
  • Hydraulic Machines and Hydropower -Various pumps, Air vessels, Hydraulic turbines - types, classifications & performance parameters; Power house - classification and layout, storage, pondage, control of
  • Hydrology and design of hydraulic structure -Hydrological cycle, Ground Water hydrology, Well hydrology and related date analysis; Streams and their gauging; River morphology; Flood, drought and their management; Capacity of
  • Water Resource Engineering - Ground and surface water resource, single and multipurpose projects, storage capacity of reservoirs, reservoir losses, reservoir
  • Water supply Engineering – Sources, Estimation, quality standards and testing of water and their treatment, Rural, Institutional and industrial water supply; Physical, chemical and biological characteristics and sources of water, Pollutants in water and its effects, Estimation of water demand; Drinking water Standards, Water Treatment Plants, Water distribution networks.
  • Waste water Engineering -Planning & design of domestic waste water, sewage collection and disposal; Plumbing Components and layout of sewerage system; Planning & design of Domestic Waste-water disposal system; Sludge management including treatment, disposal and re-use of treated effluents; Industrial waste waters and Effluent Treatment Plants including institutional and industrial sewage management.
  • Solid waste management -Sources & classification of solid wastes along with planning & design of its management system, Disposal system, Beneficial aspects of wastes and Utilization by Civil
  • Environmental Engineering and Green Building- Concepts & general
  • Soil Mechanics - Soil exploration - planning & methods, Properties of soil, classification, various tests and inter-relationships; Permeability & Seepate, Compressibility, consolidation and Shearing resistance, Earth pressure theories and stress distribution in soil; Properties and uses of Geo-synthetics.
  • Foundation Engineering -Type of foundations & selection criteria, bearing capacity, settlement analysis, design and testing of shallow & deep foundations; Slope stability analysis, Rathen embankments, Dams and Earth retaining structure: types, analysis and design, Principles of ground
  • Surveying -Classification of surveys, various methodologies, instruments & analysis of measurement of distances, elevation and directions; Field astronomy, Global Positioning System; Map preparation; Photogrammetry; Remote sensing concepts; Survey Layout for culverts, canals, bridges, road/railway alignment and buildings, Setting out of
  • Transportation Engineering-Highways- Planning & construction methodology, Alignment and geometric design; Traffic Surveys and Controls; Principles of Flexible and Rigid pavements design. Tunneling - Alignment, methods of construction, disposal of muck, drainage, lighting and ventilation. Railways Systems – Terminology, Planning, designs and maintenance practices; track modernization. Harbours – Terminology, layouts and planning. Airports – Layout, planning &
  • Solar Energy and other types of renewable energy - Concepts & general methodology.
  • Preparation of Lay out plans & building drawings - ( Plan, elevation, section) Candidates who qualify written exam will be shortlisted for documentation/DME.

Note:-1. Candidates must have qualified in Paper-I & II as the qualifying marks prescribed/determined by the CRPF. Note:-2. Marks obtained by the candidates in the Paper-I, Paper-II and interview would determine their final rankings. Note:-3. Conventional/Subjective papers must be answered in English. Question paper will be set in English only.

 

All The Best .

No comments:

Post a Comment